Wheel radial impact testing machine detailed introduction I. Wheel radial impact testing machine main functions:
Radial impact testing machine for light alloy wheels of motorcycle is referred to as wheel impact testing machine or wheel radial impact testing machine for short. It is mainly used for radial impact testing of light alloy wheels of motorcycles and mopeds. Impact method: single-hammer impact or double-hammer impact (also known as secondary impact), or 30 ° impact. The radial impact test machine for motorcycle light alloy wheels produced by our company can meet the impact test requirements of motorcycle hubs of all domestic brands and motorcycle hubs of foreign brands such as Honda, Yamaha, Suzuki, Italy, Piccolo, Harley, etc. There are two ways of digital display and computer screen display. Its specifications are optional from 100kg to 1400kg.
Second, the wheel radial impact test machine implementation standards:
1. QC / T211-1996 "Test method for light alloy wheels of motorcycles and mopeds"
2. GB / T22435-2008 "light alloy wheels for motorcycles and mopeds"
3. ISO8644-2006 "Motorcycles-Light Alloy Wheels-Test Methods"
4. GB / T6147-92 "Technical Requirements for Testing Machine Packaging, Packaging Marking, Storage and Transportation"
5. JASO T 203-2005 "Light alloy wheels for motorcycles"
3. Main technical indicators of wheel radial impact tester:
1. Mass of main impact hammer: 150kg (or 100kg)
2. Auxiliary impact hammer weight: 40kg
3. Width of impact hammer head: not less than 200mm
4. Maximum displacement of impact hammer: not less than 200mm
5. Total spring stiffness: 300 ± 10kgf / cm
6. Wheel side punch installation angle: 30 °
7. Wheel mounting bracket is adjustable: not less than 250 mm (can reach 600mm or negotiate)
8. Weight specifications: 40kg × 4, 30kg × 3, 20kg × 3, 10kg × 3, 5kg × 2
9. Maximum off-load: 100kg, 250kg, 300kg, 350kg, 450kg, 500kg, 600kg, 700kg, 800kg, 900kg, 1000kg, 1400kg (optional or negotiated)
10. Digital display of hammer impact height
11. Outer diameter of wheel specimen after tire: φ260 ～ φ770mm
12. Motor power: ≤1kw
13. Air source pressure: 0-0.7Mpa. (Air source user prepared)
14. Host power supply: ~ 380V ± 10% 50Hz must have reliable grounding measures
15. Computer power: ～ 220V ± 10% 50Hz
16. Host structure: 4-post frame structure and gate frame structure (can be selected at will)
17. Control mode: manual or microcomputer control
18. Display mode: digital display or computer screen display
Jinan Trial | Universal Testing Machine | Tensile Testing Machine | Trial Blog
Phone: (0531) 85991949/87566760/85992148 Mobile: 139-6407-7506 Fax: (0531) 87566760
Jinan New Age Trial Test Copyright Lu ICP No. 10203893 <br /> Marketing Department Address: No. 27466, Jingshi Road, Jinan City, Shandong Province Email: email@example.com